Small screws counting and packaging machine solution

Screw automatic counting and packaging machine can realize the function of automatic counting, packaging and labeling, which is an indispensable packaging system in many production factories. How is it used on the customer site? Let's take a look at the screw automatic counting packaging customer site. get best hardware counter from www.visioncounter.com.

Our customer is an American-funded screw enterprise, specializing in the production of screws used in automobile production.

From the video above, we can see that a complete set of vision counting packaging system, from right to left are material dumping system, lifting system, counting system, labeling system (Germany cab labeling machine), packaging system, finished product conveying. The operation process of the vision counting and packaging machine is: clean up the last tailing material (if any), after the new material is in place, scan the bar code on the bill of materials with the code scanner to automatically obtain the material information and the corresponding counting scheme and label information. The new material is poured into the hopper of the elevator through the automatic tipping bucket, and enters the vision counting machine through the elevator, and is automatically counted according to the required quantity (500pcs/bag in the video). After the counting is completed, it falls into the well-labeled packaging bag, and then the packaging bags will automatically sealed by the packaging machine and transported to the boxing station by the finished product conveyor.

Features of this set of screw vision automatic counting and packaging machine
1. Using VC series counting machine, the speed can reach about 6 bags of 500 screws per minute
2. Can connect with the customer's ERP system, scan the bar code of the bill of materials through the code scanner, and obtain the corresponding material counting scheme and label information
3. The elevator silo and the counting machine storage silo are protected to prevent the screw from being damaged by collision

4. According to customer requirements, the tailing material need Mandatory Cleaning for 5 Minutes in order to prevent workers from operating errors, reduce the cleaning time of tailing material to avoid it will cause material mixing
5. The whole system is well protected to ensure the safety of operators