Bearing steel ring vision counter with mix detection function
Recently, the bearing steel ring vision counter machine ordered by the domestic large bearing group has completed the debugging, and has been inspection and shipped.
This bearing steel ring vision counting machine functions differently from the conventional vision counter. The conventional vision counting machine only has the counting function, while this vision counter not only counts the bearing ring, but also detect the other diameter rings in the material.
When all materials pass the mixing area, if there are other sizes of products mixed, the belt stops moving, the buzzer alarms, the red light is on, and the screen will pop up the dialog box. After manual removal, start the work again.Counting process: The steel ring is poured into the hopper, transported forward by the belt, brushed into a layer by the brush, and then detected and counted, and the detection and counting are all completed by camera recognition.
1.Free counting and batch counting function
This bearing ring vision counting machine can count the total number of incoming materials, or by the specified number. Specify the quantity count, the wide belt counts most materials, and then make up for the small difference through a narrow belt, the material on the narrow belt is one by one state, so the counting can be accurate.
2.Detection mix function
When all materials pass the mixing area, if there are other sizes of products mixed, the belt stops moving, the buzzer alarms, the red light is on, and the screen will pop up the dialog box. After manual removal, the machine will start counting again.
Videos